Sponsors

**jakeWI** · 08-09-2010, 09:57 PM

LOCATION: Burlington, WI

RockCrusher D30 and 8.25 Diff Covers
RockCrusher 18250 - ROCKCRUSHER® Diff Cover in Bare Steel for Chrysler 8.25" Axle - Quadratec
RockCrusher 513000 - ROCKCRUSHER® Diff Cover in Black for Dana 30 Axle - Quadratec

These are heavy as hell. I would rather have them sold together so price will reflect that.

$100 shipped each
$175 shipped for both
---------------------------------------------------
27 spline 8.25 with 3.55's and drums. complete axle out of a 1996 xj. will not ship this.

$140 obo
---------------------------------------------------
XJ D44 with 4.88 gears installed. needs pinion seal. comes with drum brake parts not installed. Also with through in a thicker Rubicon Cover.

$300
---------------------------------------------------
AJ's Offroad DIY parts. Was going to post link for original price and photos but apparently he does not sell them anymore. Obviously brand new. Would rather sell together so price will reflect that.

Unibody Tie In brackets for building a front Bumper (XJ) and Flared D-Ring Mounts for building a bumper.

$120 shipped obo
---------------------------------------------------
Thicker D44 covers off of a Rubicon. I have two extra

$30 shipped each (if you want both, we can talk a different price)

PM me with any questions or if you want it. No shipping on the axle. Will take Paypal or Cash and can meet up within reason. I can get pictures but I think most of you can use your imagination on this stuff.

Might consider trades, whether its an even trade or not on either side.

Some things I can think of off the top of my head for trade would be:

Roof Basket (surco, ect.)
XJ Snorkel
ViAir OBA setup
Hella Slim 500's
Tan leather seats out of a ZJ

************Obviously I will take less from you guys if I don't have to ship***************

**jakeWI** · 08-11-2010, 07:40 PM

D30 cover and D44 axle sold pending payment.

make offers on the other stuff guys.

Will split up the AJ's bumper stuff if offers are reasonable.

Heres a pick of the aj's stuff (don't ask about the shackles, they arent for sale):

This picture just shows how beefy the d-ring tabs are:

**jakeWI** · 08-11-2010, 08:46 PM

D-Ring's SOLD

Make offer on the Uni-body Tie In Brackets.

**muddeprived** · 08-11-2010, 10:50 PM

How much thicker are the dana 44 covers compared to stock?

**jakeWI** · 08-11-2010, 10:59 PM

Quote:

Originally Posted by muddeprived

How much thicker are the dana 44 covers compared to stock?

probably between 2-4 times thicker. i can get measurements for ya of both.

**jakeWI** · 08-11-2010, 11:02 PM

stock d44 cover is around 1/16" maybe a little thinner.
the rubicon covers i have are around 1/8" maybe a little thicker.
you can def. visually see the difference between the two

let me know mudd

**jakeWI** · 08-12-2010, 11:00 PM

make some offers guys. motivated to sell (within reason I guess). really would like that 8.25 gone especially just because of how much room it takes up.

if someone were to buy the 8.25 and the rockcrusher cover for it, can make a good package deal price.

**muddeprived** · 08-12-2010, 11:02 PM

Quote:

Originally Posted by jakeWI

stock d44 cover is around 1/16" maybe a little thinner.
the rubicon covers i have are around 1/8" maybe a little thicker.
you can def. visually see the difference between the two

let me know mudd

Thanks for the measurements. My guy backed out so never mind. Good luck with the sale.

**jakeWI** · 08-12-2010, 11:10 PM

Quote:

Originally Posted by muddeprived

Thanks for the measurements. My guy backed out so never mind. Good luck with the sale.

ok. well incase, let him know that the visual difference seems like paper to cardboard persay haha. much thicker then stock.

also, I can work with price if it means sale. just keep in mind, I was planning on doing flat rate box at post office, but might be cheaper through ups so i could check. incase any of that may help.

**muddeprived** · 08-12-2010, 11:19 PM

Quote:

Originally Posted by jakeWI

ok. well incase, let him know that the visual difference seems like paper to cardboard persay haha. much thicker then stock.

also, I can work with price if it means sale. just keep in mind, I was planning on doing flat rate box at post office, but might be cheaper through ups so i could check. incase any of that may help.

He was going to replace his dented cover with yours but decided it was best just to upgrade instead so he won't do it again. He plays on the rocks.

**jakeWI** · 08-13-2010, 04:47 PM

anyone building their own bumper?

AJ's offroad bumper Uni-Body Tie in brackets, he doesnt sell them anymore.

make (PM) a shipped offer!

**jakeWI** · 08-17-2010, 09:41 PM

Unibody TIB's sold pending payment
8.25 and cover might be sold

**jakeWI** · 08-21-2010, 03:45 PM

Bumper Brackets SOLD

vmotorman · 08-22-2010, 12:00 AM

Would you consider a trade for a set of new Spidertrax adapters 5 x 4.5 to 5 x5.5 for the RockCrusher D30 and 8.25 Diff Covers?

**jakeWI** · 08-22-2010, 06:39 PM

Quote:

Originally Posted by vmotorman

Would you consider a trade for a set of new Spidertrax adapters 5 x 4.5 to 5 x5.5 for the RockCrusher D30 and 8.25 Diff Covers?

no thanks. sorry, I just have no need for them. also, the D30 cover already sold.