wiring problem... push start ignition

[DaSuberCow]

Hi im trying to wire in a push button start ignition but I don't know what wires I have to splice into to make it work... I took a picture of the wires coming out from under the steering column housing...

thanks to all who reply...

[millman]

all the colors of the rainbow.

[jerman75]

MODEL YEAR(S)
CHEROKEE 1987 -
KEY T-HARNESS IMMOBILIZER
N/A N/A N/A
PART COLOR LOCATION DIAGRAM
12 VOLT CONSTANT RED (+) IGNITION SWITCH HARNESS
STARTER DARK GREEN (+) IGNITION SWITCH HARNESS
STARTER 2 N/A
IGNITION 1 YELLOW (+) IGNITION SWITCH HARNESS
IGNITION 2 N/A IGNITION SWITCH HARNESS
IGNITION 3 N/A
ACCESSORY/HEATER BLOWER 1 BROWN (+) IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2 N/A
KEYSENSE N/A
PARKING LIGHTS ( - ) N/A
PARKING LIGHTS ( + ) BLUE (+) IN DRIVERS KICK PANEL, at RELAY
POWER LOCK GREEN (TYPE C) IN DRIVERS KICK PANEL, 3-PIN PLUG
POWER UNLOCK WHITE (TYPE C) IN DRIVERS KICK PANEL, 3-PIN PLUG
LOCK MOTOR WIRE N/A
DOOR TRIGGER BLACK/WHITE (-) IN DRIVERS KICK PANEL
DOMELIGHT SUPERVISION USE DOOR TRIGGER, Requires Part #775 Relay
TRUNK RELEASE N/A
SLIDING POWER DOOR N/A
HORN GRAY/RED (-) @ STEERING COLUMN HARNESS
TACH GRAY/WHITE (-) or WHITE (-) @IGNITION COIL
WAIT TO START LIGHT N/A
BRAKE WHITE/TAN (+) @ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM N/A
ANTI-THEFT N/A
NOTES

LINK 1 LINK TEXT 1 LINK 2 LINK TEXT 2

EXTRA INFORMATION


Cut the starter wire. tape off the side going to the key.

using a relay, connect the 30 pin to the 12v line in the harness. connect the 87 pin the the starter wire going out to the starter.

connect the 85 pin to the ignition line

connect 86 pin to one side of the button, the other side of the button to ground

[DaSuberCow]

thanks a lot for your help I have it all hooked up and the first start is today...

[AJeep]

Hi everyone i picked up an 88 cherokee limited that i want to be my new off-road toy. i sold my last one when i shouldn't have

This xj is rust free and probably never seen a trail except for the one time i took it out. when i bought it i had to replace the steering column because some thief butchered it and when i was doing this i found a wiring nightmare. seems like everyone who owned my jeep left their mark.

here is my most confusing problem..
one day i lost all power to my key, no buzz nothing its like its not even hooked up. a while ago my wife and i were testing the wires to the harness that connects into the ignition switch and the red had power, so i swapped the steering column with another one i have and still no luck. at that point i gave up.

so i thought it would be cool to bypass the key all together, thats what led me to this thread. but i would need to install switch for acc, power on and maybe a fuel cut off switch too.( thats why i came here in the first place i dont know how to do that properly )

(with the battery charged and only the ignition switch harness unplugged)
i tested that same red wire today it had no power ive always been a mister fix it but this time im lost. i checked all my relays under the hood by swapping one at a time checking if id get power but nothing. i used a new relay to do this.

does anyone know what feeds this red wire on the ignition switch with power ??

im sorry if i sound amateur but thats why im here this stuff is all new to me. any help you all could give me would be greatly appreciated. thanks alot in advanced you guys are great !