Ok my Map Sensor Vacuum Line is broken. I know on Cruiser54's website, he has a way building a new one (Throttle Body to MAP sensor hose fix). But I don't have a way of drilling a new hole at the moment. Is there another way of going about this? I know I can get bulk vacuum lines at the store...

New Battery New Alternator New battery terminal connections clean, shiny, tight Replaced Fusible link from B+ on alternator New Starter Throttle body/carb cleaned Tried bypassing Starter Solenoid still no turn over. Multimetered and tested all fuses and relays and all in good condition. No...

Long winded incoming, thanks for the read. So this morning went to start my jeep and all I got was very rapid clicking from the starter. crawled underneath of the jeep to check connections on the 3 month old starter. Everything was tight, and only minor oil on the connections that I cleaned...

Rented this bobcat today so I can level out the pad for my pole barn. Its level toward the front and middle, but back where I'm standing i have to remove 2' of soil and push a bank way back to get some usable area around it. I could push it forward to reduce the amount of grading I have to do...