General Information
Year
1996
Make
Jeep
Model
Grand Cherokee
Color
Tan
Packages
Limited
History
This is my third ZJ of this color, but my first V-8 and first Limited. The roof needed some paint, there were some electrical issues, the exhaust sucked, it had a 249 (yuck) and the motor/tranny had some serious leaks. But for $950, it was a perfect candidate for the unibody swap I was aiming to do. Plus it's a burnout machine.
1996 Jeep Grand Cherokee (Tan)
Modifications
Drivetrain
*Magnum 5.2
*Ford Racing 24lb injectors
*Accel ignition coil
*Accel plug wires
*Champion plugs
*MSD cap and rotor
*K&N air hat from Dodge 3.9 Dakota
*K&N drop-in filter
*Modified Holley throttle body (deflectors milled off, stock bore)
*Manually adjustable MAP sensor voltage regulator
*160amp alternator
*TorqFlo fan clutch
*FlowKooler water pump, factory thermostat
*Factory aux. trans cooler removed, replaced with 10,000 GVW cooler
*Factory 4.7 Durango power steering cooler
*WJ PS pump
*Magnaflow 2.5" shorty cat w/Spintech Pro Street muffler, 3" dumped before rear axle
*Torque converter lockout switch
*Hood vents
*WORKING A/C
*NP249-NP242 case swap
*Ford Racing 24lb injectors
*Accel ignition coil
*Accel plug wires
*Champion plugs
*MSD cap and rotor
*K&N air hat from Dodge 3.9 Dakota
*K&N drop-in filter
*Modified Holley throttle body (deflectors milled off, stock bore)
*Manually adjustable MAP sensor voltage regulator
*160amp alternator
*TorqFlo fan clutch
*FlowKooler water pump, factory thermostat
*Factory aux. trans cooler removed, replaced with 10,000 GVW cooler
*Factory 4.7 Durango power steering cooler
*WJ PS pump
*Magnaflow 2.5" shorty cat w/Spintech Pro Street muffler, 3" dumped before rear axle
*Torque converter lockout switch
*Hood vents
*WORKING A/C
*NP249-NP242 case swap
Interior
*5.9 Limited door cards
*Stereo + speakers w/XM and iPod hookups
*New spare tire J-hook to work with 33" spare
*Hella fuel pump cutoff switch in center console
*Stereo + speakers w/XM and iPod hookups
*New spare tire J-hook to work with 33" spare
*Hella fuel pump cutoff switch in center console
Exterior
*CB Antenna
*LED pods in factory fog location
*Hella 500's on bumper w/Silverstar H3's
*Lund visor and window deflectors
Gold trim swapped to silver (mostly, not done yet)
*TJ gas bezel
*LED pods in factory fog location
*Hella 500's on bumper w/Silverstar H3's
*Lund visor and window deflectors
Gold trim swapped to silver (mostly, not done yet)
*TJ gas bezel
Suspension
*LP30 front, factory LSD, 3.73's, HD LCA mounts, U-joint shaft swap, Alloy USA axle tube seals
*D44a rear, factory LSD, 3.73's, D60 yoke (1330 u-joint)
*
*6.5" Clayton XJ front coils, net 5.5"
*4" TJ front coils in rear, net 5.5-5.75"
*Clayton crossmember
*Clayton long arms
*Clayton HD front track bar w/bracket
*One-ton steering conversion with Chevy K-10 tie rod ends, 1.5" x.25" DOM rods
*JKS disconnects
*Addco front sway bar
*12.5" travel Bilstein 5100's front
*13.5" travel Bilstein 5125's rear
*Crown braided SS brake lines
*DPG rear bumps
*D44a rear, factory LSD, 3.73's, D60 yoke (1330 u-joint)
*
*6.5" Clayton XJ front coils, net 5.5"
*4" TJ front coils in rear, net 5.5-5.75"
*Clayton crossmember
*Clayton long arms
*Clayton HD front track bar w/bracket
*One-ton steering conversion with Chevy K-10 tie rod ends, 1.5" x.25" DOM rods
*JKS disconnects
*Addco front sway bar
*12.5" travel Bilstein 5100's front
*13.5" travel Bilstein 5125's rear
*Crown braided SS brake lines
*DPG rear bumps
Wheel and Tire
*Factory TJ Ravines, 15x8, 5.5" backspacing
*1.25" Spidertrax spacers
*33x12.50 BFG KM2's
*Net backspacing: 4.25"
*1.25" Spidertrax spacers
*33x12.50 BFG KM2's
*Net backspacing: 4.25"
Continue with Google
