Jeep Cherokee Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. General Jeep Cherokee Discussions
    I'm not sure if anyone has asked this question yet, but what are your guys' thoughts and opinions on the dana 30 and the dana 35? I've heard all kinds of anecdotal evidence both in favor of and against the dana 30. Everything from "it's no good. You'll snap an axle shaft with any amount of...
  2. Jeep Cherokee Modified Technical Forum
    I was just going to grab a pre-'96 Dana 30 from the J/Y, but i just realized there is different versions of this axle. This is what i came up with so far... Off-Road Adventures Magazine Front Dana 30 Tips- If your XJ has the Dana 30 disconnect axle, there are two cures for the common vacuum...
  3. Jeep Builds
    98 XJ Front differrential Build This was my first ever Jeep rebuild, I learned everything online and got it done. Got a donor front axle from the junk yard and took the pinon and ring diff case out. lots of learning, blood, sweat and tears but im rolling This had the Dana 30 axle. 3:55 Gear...
  4. General Jeep Cherokee Discussions
    This was my first ever Jeep rebuild, I learned everything online and got it done. Got a donor front axle from the junk yard and took the pinon and ring diff case out. lots of learning, blood, sweat and tears but im rolling :)
  5. Technical Articles
    Tools you are going to need: Jack Jack stands Lug-nut wrench Socket or Wrench to remove the caliper bolts. Either a 7mm Allen Socket on Early models or a 10mm for later ones. 13mm 12-pt socket or wrench 36mm Hub nut socket 8mm flare nut wrench Torque Wrench in the correct size drive for the hub...
1-5 of 5 Results
Top