Jeep Cherokee Talk banner

replacement

  1. Jeep Cherokee Stock Technical Forum
    My Transmission Mount has one missing bolt on the topside (so the side that goes to the transmission). I don't want to pull out the other for obvious reasons so does anyone know what size and pitch I need to replace it? Thanks.
  2. Jeep Cherokee Stock Technical Forum
    I have my APN Header painted VHT Flameproof black and i have a Felpro Intake/Exhaust Gasket, only 3 Injector O-ring's (so far), PB Blaster, and a can of B12 Chemtool. I have only the basic Socket Set and Wrenches. I plan on getting a 14mm/9/16" U-Joint, a couple more extensions, and at least a...
  3. Jeep Cherokee Stock Technical Forum
    I plan to replace my Header this week-end. I'm thinking about replacing my Motor Mounts as well, since i'll have easy access to them. Been shopping online for awhile, and so far, i've found these... Choose from Our Selection of Jeep XJ Motor Mounts M.O.R.E.'s Bombproof Motor Mounts seem to be...
  4. Jeep Grand Cherokee Technical Forum
    A friend of mine swears up and down that he has a 5.2L V8 in his 2001 Grand Cherokee. The Motor is toast and he want's to replace it with another Engine from a J/Y. I've been online checking into this, but i am gathering that the 5.2L was not an option in '01 GC's... only the 4.7L V8...
  5. Jeep Cherokee Stock Technical Forum
    I found another issue that needs to be dealt with... my a/c compressor just started making a high pitched whining/howling noise! It kinda sounds like the noise you'd get in your car stereo from running unshielded ignition wires, only much loader and speakers aren't required!!! Honestly, i feel...
  6. Jeep Cherokee Stock Technical Forum
    The decision was made to "dig-in" to my transmission this weekend. I will be cleaning my Neutral Safety Switch and taking care of my NASTY leak at the rear seal. This project shouldn't be to difficult, as i don't have a Transfer Case to deal with, for now it's (2WD). I briefly breezed through my...
  7. Jeep Cherokee Modified Technical Forum
    Alright, so Im finally getting my '95 XJ back in shape after a hiatus while I was in the fire academy. My driver seat is moldy and disformed due to the driver door hanging down a bit because the top hinge has rusted out (but thats another story). My question is that I read somewhere else about...
Top