Jeep Cherokee Talk banner
1 - 20 of 20 Posts

· Registered
Joined
·
1,234 Posts
woulnt this be the same as the build up section? which...just saying...cough cough...you havent do one...:confused:
 

· Registered
Joined
·
6,251 Posts
Discussion Starter · #3 ·
woulnt this be the same as the build up section? which...just saying...cough cough...you havent do one...:confused:
Well I guess the concept is the same, but for those who dont want to do a build thread they can express quickly their future plans. So what are yours?
 

· Registered
Joined
·
1,234 Posts
Well I guess the concept is the same, but for those who dont want to do a build thread they can express quickly their future plans. So what are yours?
pump gas...and finish the front end....

steering,long arms...and hydro assist

i have everything but the long arms and the flat knuckles
 

· Registered
Joined
·
1,234 Posts
in florida...54 boggers going down I95 doing 70 is legal....so..yeah it is..is assist..not full hydro...
 

· Registered
Joined
·
8 Posts
Well this is it now:



I'd like to throw the waggy 44 I have for the front in and a Rodeo/Passport 44 in the rear. Triangulated four link in the rear and 3 link the front and stretch both ends out a couple inches with minimal lift. It'll get a subframe and I would hope airshocks with 36's.

But I also want to use the skins off the Willys and build a buggy with shortened 60's.
 

· Registered
Joined
·
3,267 Posts
well paiting it, some 30" M/Ts, fixing the AC and a PS leak, cutting the rusty metal on the cargo area and welding some new fresh metal,,, swing tire carrier...,, fixing the flat leafs... IDK it has soo much potential...
 

· Squirrel Master
Joined
·
1,432 Posts
Short term: upgrade the steering, get it aligned, get new tires, replace the exhaust, Durango steering box.

Long term: rock sliders, skid plates, new bumpers front and rear, rear tire carrier, 8.8 rear end, 5.13 gears, electric cooling fan, 4.0 throttle body, 2" spring spacers and 2" shackles, adjustable LCAs, fixed uppers, SYE, 33" tires, lock the D30, tranny cooler...
 

· Premium Member
Joined
·
1,687 Posts
What are your future plans for your jeeps?

Personally my near future is a d44 and near to distant future is TnT LA's.
Big Stuff
1. Bushwackers
2. Full leaf springs from RC
3. SYE for NP242 (Tom Woods)
4. Front winch bumper. (Custom from DetoursUSA)
5. Winch (Super Winch)
6. KC Daylighters (Front bumper)
7. DetourUSA rock sliders and frame stiffiners. (Welded on)
8. Paint OEM red Bushwackers, rock sliders, front bumper and rear bumper.
9. 30 spline ARB air locker with rolled axles for HP Dana 30.
10. ARB air locker for Chrysler 8.25
11. ARB air compressor.
12. Stick a fork in me.

Little stuff:
1. Heavy duty Tie rod Track bar
2. Upper control arms
3. Spring spacers (add another 1 1/2 inches to the 4.5" lift)
4. Various poly bushings
5. Put the shackle back on the leaf springs. Raise the lift to 6"
6. More LED light replacements.

I know I'm forgetting something... :brickwall:
 

· Registered
Joined
·
6,251 Posts
Discussion Starter · #15 ·
Hydro assist is legal anywhere. Lots of big trucks (5 tons and up) run it - that's where the 4x4 guys got the idea from :cheers:


Full hydro is a different matter.
Sorry I was mistaking for a full setup.
 

· Registered
Joined
·
256 Posts
Since it's starting to get cold outside I am going to keep all mods minor intill spring due to the lack of garage space,I plan on getting some more Horsepower and Torque outta my 3.7 and speed happens to be my specialty so that should be interesting.I also plan on doing some interior mods like LED's and some other things I rather not say till I can get some confimation on some stuff...I guess like the old saying says "Stay tuned" lol.
 

· Budget Master
Joined
·
1,155 Posts
Well this is it now:

I'd like to throw the waggy 44 I have for the front in and a Rodeo/Passport 44 in the rear. Triangulated four link in the rear and 3 link the front and stretch both ends out a couple inches with minimal lift. It'll get a subframe and I would hope airshocks with 36's.

But I also want to use the skins off the Willys and build a buggy with shortened 60's.
that is one of the baddest grand cherokee i have ever seen!

took the pics out cause yall know what im talking about and to um help not make the page so long.
 

· Registered
Joined
·
3,267 Posts
well paiting it, some 30" M/Ts, fixing the AC and a PS leak, cutting the rusty metal on the cargo area and welding some new fresh metal,,, swing tire carrier...,, fixing the flat leafs... IDK it has soo much potential...
that was with my old XJ , dont have it anymore,,

now I have a newer better one, and well I still want that swing tire carrier
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top