Jeep Cherokee Talk banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
11,244 Posts
Did you reset the ECM after you replaced ALL those sensors? Pull both battery cables, touch them together for about 30 seconds, pull on the headlights, turn them off. then reconnect the battery. you need to let the computer relearn all those sensors. Give it a tank of fuel to complete the relearn process. And, if they are cheap part stores sensors, they could be bad out of the box.

oh, 1 more thing. don't power brake. just don't...
 
1 - 1 of 1 Posts
Top