WK2 5.7L 4WD starter replacement
1 - 2 of 2 Posts
Joined
·
4,085 Posts
I would assume so,but we know that little sayin'. I've done one on a commander 5.7 hemi. Not a fun job and not a lot of room to work. I would look for access doors in the plastic inner fender well liner. Iirc there was only one way the starter could be SQUEEZED in and out . It's not undo able just required a lot of patience.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Cam position sensor
Jeep Grand Cherokee Technical ForumSo while investigating another unrelated issue, I decided to pull my cam position sensor to get little peek down into the engine. The only thing is, I neglected to mark it's position before I pulled it. Anyone know an easy way to get it reinstalled and in time?- 8
- 92
-
Tom G · updated
-
Camshaft position sensor
Jeep Grand Cherokee Technical ForumSo while investigating another unrelated issue, I decided to pull my cam position sensor to get little peek down into the engine. The only thing is, I neglected to mark it's position before I pulled it. Anyone know an easy way to get it reinstalled and in time?- 2
- 52
-
Tom G · updated
-
"94 Grand Cherokee Limited 4.0 engine swap
Jeep Grand Cherokee Technical ForumHi ! Is it possible to put in a 2016 Model 4.7 V-8 into my old Grand Cherokee Limited 1994 ? If so will I have to make changes to the radiator, suspension and other items like the alternator etc.? Thanks and regards Javaid.- 4
- 98
-
Javaid · updated
-
Crankshaft Question on 3.6L VVT Rebuild
Jeep Grand Cherokee Technical ForumI'm currently neck deep in rebuilding the 3.6L VVT in my '13 Grand Cherokee. How I got here is a bit of a long story. I started out replacing a leaking oil cooler. I would eventually learn that while doing this, I unknowingly dropped a tiny hex bit into the intake of the right head. I found...- 3
- 95
-
WJ 2wd to 4wd conversion
Jeep Grand Cherokee Technical ForumI have a 99 WJ and it's unfortunantly a 2wd, im doing research on converting it to 4wd but im not getting a lot of info for specifically the WJ. Can anyone thats done the conversion tell me about it, what you needed, any issues that came up, etc etc. I just want to make sure im 100% prepared...- 4
- 265
-
Tyrus · updated
Join now to ask and comment!